sfh1617a www.vishay.com vishay semiconductors rev. 2.1, 10-may-17 1 document number: 83552 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 optocoupler, phototransistor output, high reliability, 5000 v rms , 110 c rated description the 110 c rated sfh1617a (dip) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. these couplers have a gaas infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic dip-4 package. the coupling devices are design ed for signal transmission between two electrically separated circuits. the couplers are end-stackable with 2.54 mm spacing. creepage and clearance distances of > 8.0 mm are achieved with option 6. this version complies with iec 60950 (din vde 0805) for reinforced insulation up to an operation voltage of 400 v rms or dc. specifications subject to change. features ? operating temperature from - 55 c to + 110 c ? good ctr linearity de pending on forward current ? isolation test voltage, 5000 v rms ? high collector emitter voltage, v ceo = 70 v ? low saturation voltage ? fast switching times ? low ctr degradation ? temperature stable ? low coupling capacitance ? end stackable, 0.100" (2.54 mm) spacing ? high common mode interference immunity ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ?ac adapter ?smps ?plc ? factory automation ? game consoles agency approvals ? ul1577, file no. e52744 ? cul tested to csa 22.2 bulletin 5a ? din en 60747-5-2 (vde 0884)/din en 60747-5-5 (pending) available with option 1 ? bsi en 60950; en 60065 ?fimko ? cqc (pending) note ? additional options may be possib le, please contact sales office 1 2 4 3 e c a c 17918-20 ordering information sfh1617a-#x0##t part number ctr bin package option tape and reel agency certified/package ctr (%) ul, cul, bsi, fimko 40 to 80 63 to 125 100 to 200 160 to 320 dip-4 - sfh1617a-2 SFH1617A-3 - vde, ul, cul, bsi, fimko 40 to 80 63 to 125 100 to 200 160 to 320 dip-4, 400 mil, option 6 - - SFH1617A-3x016 - smd-4, option 7 - sfh617a-2x017t - - 7.62 mm 10.16 mm > 8 mm option 7 option 6 dip-4
sfh1617a www.vishay.com vishay semiconductors rev. 2.1, 10-may-17 2 document number: 83552 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? stresses in excess of the absolu te maximum ratings can ca use permanent damage to the device. functional operation of the devic e is not implied at these or any other conditions in excess of those give n in the operational sections of this document. exposure to abs olute maximum ratings for extended periods of th e time can adversely affect reliability (1) refer to reflow profile for soldering conditions for surface mount ed devices (smd). refer to wave profile for soldering conditi ons for through hole devices (dip) note ? minimum and maximum values are testing requirements. typical values are characteristics of the device and are the result of en gineering evaluation. typical values are for information only and are not part of the testing requirements absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit input reverse voltage v r 6.0 v dc forward current i f 60 ma surge forward current t 10 s i fsm 2.5 a led power di ssipation p diss 70 mw output collector emitter voltage v ceo 70 v emitter collector voltage v eco 7.0 v collector current i c 50 ma collector peak current t p /t = 0.5, t p 10 ms i cm 100 ma output power dissipation p diss 150 mw coupler isolation test voltage between emitter and detector, refer to climate din 40046, part 2, nov. 74 v iso 5000 v rms isolation resistance v io = 500 v, t amb = 25 c r io 10 12 v io = 500 v, t amb = 100 c r io 10 11 storage temperature range t stg -55 to +150 c ambient temperature range t amb -55 to +110 c soldering temperature (1) 2 mm from case, 10 s t sld 260 c electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test condition part symbol min. typ. max. unit input forward voltage i f = 60 ma v f - 1.35 1.65 v reverse current v r = 6.0 v i r -0.0110a capacitance v r = 0 v, f = 1.0 mhz c o -13-pf output collector emitte r capacitance v ce = 5.0 v, f = 1.0 mhz c ce -5.2- pf collector emitter leakage current v ce = 10 v sfh1617a-1 i ceo -2.050na sfh1617a-2 i ceo -2.050na SFH1617A-3 i ceo -5.0100na sfh1617a-4 i ceo -5.0100na coupler collector emitte r saturation voltage i f = 10 ma, f = 1.0 mhz v cesat - 0.25 0.4 v coupling capacitance c c -0.4- pf
sfh1617a www.vishay.com vishay semiconductors rev. 2.1, 10-may-17 3 document number: 83552 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - test circuit, non-saturated operatio n fig. 2 - test circuit, saturated operation current transfer ratio (t amb = 25 c, unless otherwise specified) parameter test condition part symbol min. typ. max. unit i c /i f i f = 10 ma, v ce = 5.0 v sfh1617a-1 ctr 40 - 80 % sfh1617a-2 ctr 63 - 125 % SFH1617A-3 ctr 100 - 200 % sfh1617a-4 ctr 160 - 320 % i f = 1.0 ma, v ce = 5.0 v sfh1617a-1 ctr 13 30 - % sfh1617a-2 ctr 22 45 - % SFH1617A-3 ctr 34 70 - % sfh1617a-4 ctr 56 90 - % switching characteristics (t amb = 25 c, unless otherwise specified) parameter test condition part symbol min. typ. max. unit non-saturated turn-on time i f = 10 ma, v cc = 5.0 v, r l = 75 t on -3.0- s rise time i f = 10 ma, v cc = 5.0 v, r l = 75 t r -2.0- s turn-off time i f = 10 ma, v cc = 5.0 v, r l = 75 t off -2.3- s fall time i f = 10 ma, v cc = 5.0 v, r l = 75 t f -2.0- s cut-off frequency i f = 10 ma, v cc = 5.0 v f ctr - 100 - khz saturated turn-on time i f = 20 ma sfh1617a-1 t on -3.0- s i f = 10 ma sfh1617a-2 t on -4.2- s SFH1617A-3 t on -4.2- s i f = 5.0 ma sfh1617a-4 t on -6.0- s rise time i f = 20 ma sfh1617a-1 t r -2.0- s i f = 10 ma sfh1617a-2 t r -3.0- s SFH1617A-3 t r -3.0- s i f = 5.0 ma sfh1617a-4 t r -4.6- s turn-off time i f = 20 ma sfh1617a-1 t off -18-s i f = 10 ma sfh1617a-2 t off -23-s SFH1617A-3 t off -23-s i f = 5.0 ma sfh1617a-4 t off -25-s fall time i f = 20 ma sfh1617a-1 t f -11-s i f = 10 ma sfh1617a-2 t f -14-s SFH1617A-3 t f -14-s i f = 5.0 ma sfh1617a-4 t f -15-s channel i channel ii 95 10804-3 r g = 50 t p t p = 50 s t = 0.01 + 5 v i f 0 50 r l i f oscilloscope r l = 1 m c l = 20 pf channel i channel ii 95 10843 r g = 50 t p t p = 50 s t = 0.01 + 5 v i c i f 0 50 1 k i f = 10 ma oscilloscope r l c l 20 pf 1 m
sfh1617a www.vishay.com vishay semiconductors rev. 2.1, 10-may-17 4 document number: 83552 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - switching times note ? according to din en 60747-5-2 (vde 0884). thes e optocouplers are suitable for safe elec trical insulation on ly within the saf ety ratings. compliance with the safety ra tings shall be ensured by means of protective circuits t p t t 0 0 10 % 90 % 100 % t r t d t on t s t f t off i f i c t p pulse duration t d delay time t r rise time t on (= t d + t r ) turn-on time t s storage time t f fall time t off (= t s + t f ) turn-off time 96 11698 safety and insulation ratings parameter test condition symbol min. typ. max. unit climatic classificati on according to iec 68 part 1 - 55 / 110 / 21 - comparative tracking index cti 175 - 399 rated impulse voltage v iotm --8kv maximum working voltages recurring peak voltage v iorm --890v forward current i si --275ma power dissi pation p so --400mw safety temperature t si --175c creepage distance 7.0 - - mm clearance distance 7.0 - - mm isolation distance per iec 60950 2.10.5.1 0.4 - - mm
sfh1617a www.vishay.com vishay semiconductors rev. 2.1, 10-may-17 5 document number: 83552 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 4 - forward voltage vs. forward current fig. 5 - collector current vs. collector emitter voltage (ns) fig. 6 - collector current vs. collector emitter voltage (sat) fig. 7 - leakage current vs. ambient temperature fig. 8 - normalized ctr (ns) vs. ambient temperature fig. 9 - normalized ctr (sat) vs. ambient temperature 0.6 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.6 0.1 1 10 100 i f - forward current (ma) v f - forward voltage (v) t amb = - 55 c 1.5 0.7 t amb = - 40 c t amb = 0 c t amb = 25 c t amb = 50 c t amb = 75 c t amb = 100 c t amb = 110 c 0 20 30 40 50 60 70 80 90 01 78 v ce - collector emitter voltage (n s ) (v) i c - collector current (ma) 10 6 5 4 3 2 i f = 20 ma i f = 15 ma i f = 10 ma i f = 30 ma i f = 5 ma 0 10 15 20 30 00.4 v ce - collector emitter voltage ( s at) (v) i c - collector current (ma) 5 0.3 0.2 0.1 25 i f = 10 ma i f = 25 ma i f = 5 ma i f = 2 ma i f = 1 ma 0.001 0.01 0.1 10 1 100 1000 100 000 - 60 120 t amb - ambient temperature (c) i ce0 - leakage current (na) 10 000 v ce = 40 v - 40 100 80 60 40 20 0 - 20 i f = 0 ma v ce = 12 v v ce = 24 v 0 0.2 0.6 0.4 0.8 1.0 1.4 - 60 120 t amb - ambient temperature (c) ctr norm - normalized ctr (n s ) 1.2 - 40 100 80 60 40 20 0 - 20 i f = 5 ma i f = 10 ma i f = 1 ma v ce = 5 v 0 0.2 0.6 0.4 0.8 1.0 1.4 - 60 120 t amb - ambient temperature (c) ctr norm - normalized ctr ( s at) 1.2 - 40 100 80 60 40 20 0 - 20 i f = 5 ma i f = 10 ma i f = 1 ma v ce = 0.4 v
sfh1617a www.vishay.com vishay semiconductors rev. 2.1, 10-may-17 6 document number: 83552 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 10 - normalized ctr (ns) vs. forward current fig. 11 - normalized ctr (sat) vs. forward current fig. 12 - ctr frequency vs. phase angle fig. 13 - ctr frequency vs. collector current fig. 14 - switching time vs. load resistance 0 0.2 0.6 0.4 0.8 1.0 1.4 0.1 100 i f - forward current (ma) ctr norm - normalized ctr (n s ) 1.2 110 v ce = 10 v t amb = - 55 c t amb = - 40 c t amb = 0 c t amb = 25 c t amb = 50 c t amb = 75 c t amb = 100 c t amb = 110 c 0 0.2 0.6 0.4 0.8 1.0 1.4 0.1 100 i f - forward current (ma) ctr norm - normalized ctr ( s at) 1.2 110 t amb = - 55 c t amb = - 40 c t amb = 0 c t amb = 25 c t amb = 50 c t amb = 75 c t amb = 100 c t amb = 110 c v ce = 0.4 v - 25 - 20 - 15 - 10 0 1 1000 f - fre q uency (khz) pha s e (deg) - 5 10 100 v ce = 5 v 1 10 1000 0.1 100 i c - collector current (ma) f ctr - ctr fre q uency (khz) 100 110 v cc = 5 v 0.1 1 10 1000 0.1 100 r l - load re s i s tance (k ) t on , t off - s witching time ( s ) 100 110 v ce = 5 v, i f = 10 ma t on t off
sfh1617a www.vishay.com vishay semiconductors rev. 2.1, 10-may-17 7 document number: 83552 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimenisons in millimeters package marking notes ? vde logo is only marked on option 1 parts. option information is not marked on the part ? tape and reel suffix (t) is not part of the package marking i178027-10 6.5 0.5 pin 1 identifier 0.26 7.62 to 9.98 7.62 0.3 4.58 0.5 2.54 0.25 0.5 0.1 0.85 0.1 2.8 0.5 3.3 0.5 3.5 0.3 0.5 typ. 12 43 20802-30 2.54 1.78 0.76 8 min. 1.52 11.05 r 0.25 10.16 typ. 7.62 typ. option 6 3.5 0.3 0.1 min. 2.7 min. 8 min. 7.62 typ. 3.5 0.3 0.6 min. 10.16 0.3 option 7 0.35 + 0.25 - 0.3 sfh1617a-2 v yww 25
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
